Detailed Product Description

Name: hid Motorcycle  Lamp 9005
Power: 35 W
Luminous Flux: 3600L
Lifetime: 3000h
Color Temperature: 3000K, 4300K, 5000K, 6000K, 8000K, 10000K, 12000K, Blue, Purple, Pink and Green
Input Voltage: 9V-16V
Standard Input Current: 3.2A
Package: our box or OEM box

Instruction for Installation of Hid Motorcycle Lights:
1. Separate the headlamps (right & left) from your car after opening your car bonnet. If there is

enough space for exchange, it is not needed to separate the headlamps from your car.
2. Open the rear cover of the headlamp and pull the installed halogen lamp out.
3. Drill a hole in the middle lf the rear cover of the headlamp with a 21mm hole cutter.
4. Take out the plastic cap of the HID bulb.(be careful not to touch the bulb.)
5. Put the HID lamp into the headlamp unit. ( caution: please confirm whether the installation of

press spring has settled properly after installing the lamps. )
Caution: please check again whether the installation is proper after installing the lamps.
6. Connecting the wires-referring to the wiring diagram in the guide book.
7. Close the cap of the headlamp after fitting the rubber barking attached to the bulbs wire into9

the units cover.
8. Stick the ballast on the nearest place from the headlamp in the engine room firmly by using

double-faced tape, cable tie and etc.
9. Connect the wire of the ballast with the wire of bulb.
10. Test whether or not the headlamps work properly.